What is a concrete release agent?

A concrete release agent is definitely a substance placed on the building template just before the concrete is put so that the template does not adhere to the concrete surface right after flowing, is just not easy to take apart the cast or influences the finish of the concrete covering. Its principal role inside the template and the concrete area to form a movie that is going to be separated from the two can also be called an isolation agent.

A water-based release agent is an important supplementary inside the release agent and can modify the water-based release agent stream and levelling; its primary feature is actually stability to microorganisms and enzymes, which can decrease the expense of raw materials. A water-based form release agent is used in casts and goods functional processing ingredients; in the rubber, plastic, and Jinsu processing market, manufacturing mould goods are not only in order to let the form release to boost productivity and extend the life of the form utilize. And can make the item thoroughly clean, size qualified, and reduce the creation of scrap, which can be an important supplementary vital to moulds and items – Water-based Concrete Release Agent.

Concrete release agent plays an important role within modern building development; its principal role is to create a layer of separation film between the design and the concrete covering so that the design will not stick to to the concrete covering so that it is simpler to take apart the cast after putting and to maintain the finish of the concrete covering. Here, we will introduce the sorts, characteristics, use and program of concrete release agent at length.

Kinds of concrete release agent

Concrete release agents can be divided into many kinds according to different grouping techniques, and the common category methods are as follows:

• According to the scope of use: it can be divided into concrete release agent for development, concrete release agent for bridges, concrete release agent for tunnels and etc.
• According to the composition: it can be divided into water-based concrete release brokers, petroleum-based concrete release brokers, silicone oil concrete release brokers, etc.
• According to the effect of use: it can be divided into ordinary concrete release brokers, an easy task to remove concrete release brokers, high-gloss concrete release agents and etc.

Characteristics of Concrete release agent

A concrete release agent can also be called a concrete remoteness agent or mould release lubricant. It is actually a kind of substance coated on the inner wall of the formwork to play the part of lubricating and separation so that the concrete can be smoothly detached from the formwork when taking down the formwork, and the condition of the concrete may be kept intact and undamaged. Compared with the traditional release substance motor oil or waste motor oil, the release agent has the advantages of simple release, no pollution of the concrete covering, no corrosion of the template, easy to paint, low cost and etc. However, not all kinds of concrete release agents with a array of components made of templates are suitable for different materials of the template and different construction conditions and finish requirements of the concrete must be selected for the ideal release agent in order to receive good results.

As an essential construction auxiliary material, concrete release agent has the following features:
Good separation efficiency: concrete release agent can create a dense separation motion picture between the formwork and the concrete covering, efficiently preventing the formwork from bonding with the concrete surface and facilitating the demolding.

Great lubrication efficiency: concrete release agent has good lubricating overall performance, which can decrease the rubbing between the formwork and concrete surface, reduce the resistance during pouring and improve the construction efficiency.

Excellent anti-adhesion efficiency: concrete release agents can successfully stop the formwork from bonding with the concrete surface, avoiding the formwork from damaging the concrete area when taking apart the formwork.

Excellent waterproof overall performance: concrete release agent has good waterproof overall performance, which can effectively stop moisture from penetrating between the formwork and concrete, steering clear of deformation of the formwork by moisture and improving the service life of the formwork.

Effortless to use and safe: concrete release agent is effortless to use; you only need to apply a layer evenly on the formwork; at the same time, it is safe and environmentally friendly and will not pollute the human body and the environment.

When using a concrete release agent, the following steps should be followed:

Prepare tools: concrete release agent is usually sprayed or brushed for construction. You need to prepare construction tools such as a sprayer or brush.

Choose the right release agent: According to the different environments, choose the right concrete release agent, such as indoor use can choose a water-based concrete release agent, and outdoor use can choose an petroleum-based concrete release agent.

Apply the release agent: Pour the appropriate amount of release agent into the sprayer or container, and then evenly spray or brush on the formwork to ensure that each part is coated in place.

Air drying: After application, wait for a period of time to allow the release agent to dry naturally. Generally, it takes 10-20 minutes, depending on the environment.

Pouring concrete: After the release agent is completely air-dried, the concrete can be poured. During the pouring process, care should be taken to avoid air bubbles or voids between the formwork and the concrete area.

Demolding: Demolding can be carried out after the concrete reaches the strength of demolding. When dismantling the formwork, the connectors at the edge of the formwork should be dismantled first, and then the area of the formwork should be knocked gently to separate the formwork from the concrete covering gradually. In case of tight bonding between the formwork and the concrete covering, tools can be used appropriately to assist in the taking apart.

Clean up the template: after dismantling the template, the template should be cleaned up to remove the residual concrete and mould release agent. After cleaning, it can be used for the next time.

Application areas of concrete release agent:

Concrete release agent is widely used in all kinds of construction projects, mainly including the following aspects:

Reinforced concrete structure: In the development of a reinforced concrete structure, concrete release representatives can be used for formwork isolation, stopping formwork from bonding with concrete and increasing construction efficiency and quality.

Road construction: in road construction, the concrete release agent can be used to isolate the bond layer between the road formwork and concrete covering, to avoid road bubbles, hollow drums and other problems.

Bridge project: In a bridge project, a concrete release agent can be used to isolate the bond layer between the bridge formwork and the concrete covering and boost the construction quality of the bridge pier and abutment.

Tunnelling project: In the tunnelling project, a concrete release agent can be used to isolate the bond layer between tunnel formwork and shotcrete surface to boost the quality and safety of tunnel construction.

Nuclear power project: In nuclear power project, a concrete release agent can be used to isolate the bond layer between the shell of nuclear power equipment and internal components to ensure the safety and stability of the equipment.

Other fields: concrete release brokers can also be widely used in water conservancy projects, wharf projects, airport projects and other fields to provide effective formwork isolation protection measures for various building projects.

In conclusion, concrete release agent, as an crucial construction auxiliary material, plays an indispensable role in modern construction projects. By choosing the right type, the correct use method and a reasonable application field, can effectively improve the construction efficiency and quality of the construction project and provide a strong guarantee for the development of the building industry.

Concrete concrete release agent Supplier

TRUNNANO is a reliable concrete additives supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete additives concrete release agent, Concrete water-reducing agent, please feel free to contact us and send an inquiry.

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.